Geothermal · Excavation · Build · Spring Hill, Kansas(913) 205-5848bryan@auorkc.com

Excavation & sitework · Ponds

Pond excavation.

Small ponds for acreage, livestock, wildlife & landscape use, dug & shaped with a compact excavator & mini track loader where the site & pond size suit compact equipment. GeothermalKC can build the access, drainage & outdoor spaces around the finished pond.

Request Consultation

Sized to the right machine

Pond work ranges from a small wildlife pond to a large farm impoundment with a dam & spillway. Compact equipment suits the smaller end: shaping, deepening & building small ponds where access is limited or the ground is already developed.

Larger ponds, dams & anything involving a stream may need permits, engineering & bigger machines. The consultation establishes early which side of that line a project falls on.

One company from the first dig to the finished build, with compact excavation equipment suited to tight residential access, for projects across the Kansas City metro & surrounding counties.

Small pond in a grassy field with trees behind it
Representative photo

What the work can include

  • Excavating & shaping small ponds
  • Shaping banks & shelves for access & safety
  • Placing & spreading excavated soil on site
  • Inlet & overflow shaping where the design calls for it
  • Rough grading around the finished pond

Excavation & build

From the dig to the finished setting

A new pond often changes how the rest of the property is used. The work around it can be part of the same project.

Request Consultation
  • Access drives & paths
  • Overflow & drainage work
  • Decks, patios & outdoor living near the water
  • Retaining walls & banks
  • Grading & landscaping

How a pond project runs

  1. Consultation request

    Send the location, the size in mind, the water source & photos of the area.

  2. Site walk

    Soil, drainage area, access & where the spoil can go are checked.

  3. Written scope

    Size, depth, bank slopes & spoil handling are agreed, along with any permits needed.

  4. Excavation

    The pond is dug & shaped with the compact excavator & mini track loader.

  5. Finish

    Banks & the surrounding area are graded & finished as agreed.

Typical projects & exclusions

Typical projects

  • Small acreage & wildlife ponds
  • Landscape ponds with limited access
  • Deepening or reshaping an existing small pond

Not included

  • Large farm ponds & dams that need bigger equipment
  • Work in streams or regulated waters without the required permits
  • Pond liners & water features, which are by others

Common questions

Will a pond hold water on my property?

Soil type & the drainage area feeding the pond decide that more than anything done with the excavator. Clay soils usually hold well. Both are checked during the site walk.

Do I need a permit to build a pond?

Small ponds often do not, but dams, work in streams & some locations do. Requirements vary, so they are part of the consultation & the written scope.

How big a pond can a compact excavator dig?

GeothermalKC focuses on small ponds that suit a compact excavator & mini track loader. For larger ponds, a bigger machine is the better choice & the consultation says so.

Project consultations

Request a Consultation

Pond excavation & the build that follows, across the Kansas City metro & surrounding counties. Consultation requests with the location & photos of the site are the quickest to schedule.