Geothermal · Excavation · Build · Spring Hill, Kansas(913) 205-5848bryan@auorkc.com

Johnson County, Kansas

Geothermal, Excavation & Construction in Gardner, KS

Gardner sits on the southwest edge of Johnson County, where town lots give way to acreage. Shop & barn pads, gravel drives, ponds & geothermal on open ground are all common here, a short drive from the Spring Hill base.

Request Consultation(913) 205-5848

  • 7 minorthwest of Spring Hill
  • JohnsonCounty, Kansas
  • YesGeothermal service
  • YesExcavation & construction

Geothermal in Gardner

Geothermal heating & cooling in Gardner, KS

Ground source systems for homes, acreage & commercial buildings in Gardner, where open ground gives the most freedom in loop layout. The loop field is dug & the system installed by the same company.

New geothermal installation

Ground loop, heat pump & controls for new homes & buildings in Gardner.

Details

Geothermal replacement

New equipment for an aging geothermal system, with the existing loop evaluated first.

Details

Geothermal retrofit

Moving an existing building from a furnace, boiler or air source system to geothermal.

Details

Excavation & construction in Gardner

Excavation, sitework & the build that follows in Gardner, KS

Each job starts with the dirt work & can carry straight through to the finished project: slabs, foundations, walls, drives, shops, additions & geothermal systems.

French drains in Gardner

View service

Grading & dirt work in Gardner

View service

Utility trenching in Gardner

View service

Retaining walls in Gardner

View service

Footings & foundations in Gardner

View service

Pond excavation in Gardner

View service

Pond dredging in Gardner

View service

Gravel driveways in Gardner

View service

Working in Gardner

  • Gardner is about 7 miles northwest of the GeothermalKC base in Spring Hill.
  • Utility locates through Kansas 811 come before every dig.
  • Permits: city of Gardner inside city limits, Johnson County outside them.
  • Acreage & rural properties near Gardner suit horizontal or angled geothermal loop layouts & larger site work.
  • Residential & commercial projects, from single drainage fixes to full builds.
  • Barndominiums, shops, farm & light commercial buildings near Gardner, from site work to the finished building.
Does GeothermalKC work in Gardner, KS?

Yes. Gardner is inside both service areas, so geothermal installations, replacements & retrofits, excavation, sitework & the construction that follows are all available.

How far is Gardner from GeothermalKC?

Gardner is about 7 miles northwest of the GeothermalKC base in Spring Hill, a straight line distance. Scheduling is confirmed at the consultation.

Who handles permits for work in Gardner?

Work inside Gardner city limits is permitted through the city; properties outside city limits generally go through Johnson County. GeothermalKC confirms the permits a project needs during the consultation & builds to them.

Are utilities located before digging in Gardner?

Yes. Every excavation in Kansas starts with a Kansas 811 locate request, & digging waits until the marks are in place.

Also serving near Gardner

All service areas & map

Project consultations

Request a Consultation in Gardner

Project details, the address & photos help GeothermalKC prepare. Or call (913) 205-5848.

Request a Consultation

Projects in Gardner, KS & nearby.

Photos or Plans (optional)
or drag them here

Photos or PDF. Up to 5 files, 4 MB total.